Categories
Powder Coating Equipment Manufacturer

Wagner PEM x1 Spare Parts

Wagner PEM x1 Spare Parts
Wagner PEM x1 Spare Parts

We manufacture non-OEM Wagner PEM x1 Spare Parts for sale. Flat Spray Electrode Holder, Hose Connector, O-Ring, Jet Nozzle, Deflector cone.

Powder coating is increasingly accepted as the preferred finishing process for many applications. Increasingly stringent environmental regulations, rising costs in all areas, and demands by consumers for better quality and more durable products are among the challenges facing today’s finishers. Powder coatings provide a solution to these challenges and others. Powder coating is the technique of applying dry paint to the component.

The powdered paint is normally applied by using a powder feed system and gun to electrostatically charge and spray the powder onto the part. For some applications, the part being coated is dipped into a fluidized bed of powder. The coated part is then heated in an oven, or via infrared panels, to melt and cure the paint. During the curing process, a chemical cross-linking reaction is triggered and it is this chemical reaction that gives the powder coatings many of their desirable properties.

Wagner PEM x1 Spare Parts
Wagner PEM x1 Spare Parts

Wagner PEM x1 Spare Parts

AW2322529-00 – FLAT SPRAY ELECTRODE HOLDER

AW2320488-00 – PROTECTIVE WEDGE

AW2321976-00 – X1 FLAT SPRAY NOZZLE

AW2320464-00 – UNION NUT / GUN CAP

AW2322490-00 – ROUND SPRAY ELECTRODE HOLDER (OEM)

AW2320503-00 – ROUND JET SLEEVE

AW2321981-00 – X1 DEFLECTOR CONE D18

AW2321980-00 – X1 DEFLECTOR CONE D25

AW2321171-00 – X1 DEFLECTOR CONE D34

AW2322493-00 – ELECTRODE HOLDER W/ DEFLECTORS

AW2322761-00 – HOSE CONNECTOR

AW9971364-00 – O-RING

AW2389365-W – RETROFIT KIT, GUN HOUSING (UPDATED) W/ 6M CABLE

AW2398699-W – RETROFIT KIT, GUN HOUSING (UPDATED) W/ 15M CABLE

AW2399105-W – For use on PEM-X1 manual gun with S/N above 19099, or if retro-fit kit has already been installed on gun

AW2399106-W – For use on PEM-X1 manual gun with S/N above 19099, or if retro-fit kit has already been installed on gun

AW2324123-W – POWDER TUBE, PEM-X1 ET

Wagner Non-OEM Spare Parts

Wagner Non-OEM Spare Parts
Wagner Non-OEM Spare Parts

Wagner non-OEM spare parts are replacement parts for Wagner powder coating equipment that are manufactured by third-party companies. These parts are typically less expensive than Wagner OEM parts, but they may not be of the same quality.

There are a number of reasons why someone might choose to use Wagner non-OEM spare parts. One reason is cost. Wagner OEM parts can be expensive, especially for older models of equipment. Non-OEM parts are typically much cheaper.

Another reason to use non-OEM parts is availability. Wagner OEM parts can be difficult to find, especially for older models of equipment. Non-OEM parts are typically more widely available.

Finally, some people simply prefer to use non-OEM parts. They may believe that the quality of non-OEM parts is just as good as the quality of OEM parts, or they may simply prefer to support third-party companies.

Pros of using Wagner non-OEM spare parts:

  • Less expensive
  • More widely available
  • May be supported by third-party companies

When to use Wagner non-OEM spare parts

Wagner non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies and to make sure that the parts are compatible with your Wagner equipment.

Here are some tips for choosing Wagner non-OEM spare parts:

  • Choose parts from reputable companies. There are a number of companies that manufacture high-quality non-OEM parts for Wagner equipment. Do some research to find companies that have a good reputation.
  • Make sure the parts are compatible with your Wagner equipment. Not all non-OEM parts are compatible with all Wagner equipment. Be sure to check the compatibility of the parts before you buy them.
  • Read reviews of non-OEM parts. There are a number of websites where you can read reviews of non-OEM parts. This can be a helpful way to learn about the quality and performance of different parts.

Overall, Wagner non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies like EMS and to make sure that the parts are compatible with your Wagner equipment.

Wagner Non-OEM Spare Parts

We manufacture non-OEM Wagner spare parts with high quality and low prices for the Wagner Sprint gun. Check our link below for the Wagner spare parts list and Wagner powder coating gun spare parts.

Wagner offers a wide range of spare parts for their paint sprayers, including:

  • Nozzles: Round jet nozzles, fan nozzles, and other types of nozzles are used to apply paint to surfaces.
  • Filter assemblies: Filter assemblies remove dirt and debris from the paint before it is sprayed.
  • O-rings: O-rings seal joints and prevent leaks.
  • Hoses: Paint hoses connect the paint sprayer to the paint container.
  • Other parts: Other spare parts include gaskets, seals, and springs.

If you need to replace a spare part on your Wagner paint sprayer, it is important to order the correct part from a reputable supplier. You can find a list of Wagner authorized distributors on the Wagner website.

Here are some examples of Wagner spare parts that you can purchase:

  • Round jet nozzle set for Control Pro 150: #580662A
  • Fan nozzle set for Control Pro 150: #580663A
  • Filter assembly for Control Pro 150: #580405A
  • O-ring kit for Control Pro 150: #580406B
  • Paint hose for Control Pro 150: #580155A

You can also purchase Wagner spare parts kits, which include a variety of common spare parts. This can be a convenient way to have a stock of spare parts on hand so that you can quickly and easily repair your paint sprayer if needed.

Here is a list of some of the main Wagner spare parts, along with their order numbers:

  • Nozzles:
    • Round jet nozzle set for Control Pro 150: #580662A
    • Fan nozzle set for Control Pro 150: #580663A
    • Round jet nozzle set for Flexio 510: #529262
    • Fan nozzle set for Flexio 510: #529263
  • Filter assemblies:
    • Filter assembly for Control Pro 150: #580405A
    • Filter assembly for Flexio 510: #417323
  • O-rings:
    • O-ring kit for Control Pro 150: #580406B
    • O-ring kit for Flexio 510: #417324
  • Hoses:
    • Paint hose for Control Pro 150: #580155A
    • Paint hose for Flexio 510: #529261
  • Other parts:
    • Trigger assembly for Control Pro 150: #580404A
    • Trigger assembly for Flexio 510: #417322

This is just a small sample of the many Wagner spare parts that are available. For a complete list of spare parts, please consult the Wagner website or contact a Wagner authorized distributor.

It is important to note that these order numbers may change over time, so it is always best to verify the order number with your Wagner authorized distributor before placing an order.

If you are unsure which spare part you need for your Wagner paint sprayer, you can contact us for assistance.

Below, you can find the Non-OEM Wagner powder coating gun spare parts list for your reference:

Wagner Spare Parts

  • Deflector Cone D28 0390208
  • Deflector Cone D25 0390209
  • Deflector Cone D32 0531227
  • Deflector Cone D17 0351225
  • Deflector Cone D20 0390207
  • Deflector Cone D25 0351226
  • Air Nozzle 0351346
  • Conductive Sleeve 0241476
  • Injector Nozzle 0241430
  • Collector Nozzle 0241229
  • Venturi Injector Nozzle
  • Clearance Collector 0241225
  • Deflector Cone Sleeve 0390313
  • Outer Nut 0351620
  • Outer Nut 0351309
  • Injector Nozzle 0241923
  • C4 Flat Jet Tip Split F1 390324
  • C4 Flat Jet Tip Split F2
  • Flat Spray Nozzle Complete for Spray Gun
  • Fan Spray Nozzle 0351232
  • Coupling Joint 9992200
  • Powder Tube 0351665
  • Powder Tube C2 Manual Gun 0351317
  • C4 Outer Nut
  • Powder Tube Back 0351618
  • Fan Spray Nozzle 0351901
  • Nozzle Insert 0351900
  • Fan Spray Nozzle 0390326
  • C4 Electrode Holder ET 0390915
  • C4 Electrode Holder 0390916
  • Powder Tube Inner Diameter 11/12 0351619
  • C3 Nozzle Insert Assembly 0351940
  • C4 Electrode Holder 0390917
  • Powder Tube C4 0390909
  • Powder Tube C4 0390911
  • Nozzle Split 260928
  • Fan Spray Electrode
  • Round Spray Electrode
  • Nozzle Body Assembly C3 0351201
  • Nozzle Body Assembly 0390204
  • Wagner Powder Injector 0241621
  • C4 Spray Gun Extension 150 mm
  • C4 Spray Gun Extension 300 mm
  • Wagner Cascade 259900
  • Grounded Powder Hose 11×16
  • Grounded Powder Hose 12×18
  • Grounded Powder Hose 10×15

Wagner Powder Gun Spare Parts

Wagner Powder Gun Spare Parts
Wagner Powder Gun Spare Parts

Description Item number
Basic units
Manual Spray Gun PEM-X1 2322587
Manual Spray Set X1 2331090
Manual Unit SPRINT AF 2329483
Manual Unit SPRINT 60L 2329489
Manual Unit SPRINT AF USA 2329487
Manual Unit SPRINT 60L USA 2329491
Dual Manual Set SPRINT 2331417
Conversion Set SPRINT 60L V 2309276
Conversion Set SPRINT 3L V 2309277
Manual CupGun PEM-X1 CG 2322588
CupGun Set PEM-X1 CG 2328172
Controler EPG-Sprint X 2324731
Accessories
Trolley Front Caster Set 2324869
Recipe Sticker 2331223
CoronaStar PEM-X1 assy 2322868
Wedge tool X1 2324205
Wedge tool X1 + 20 wedges 2324124
Spare parts starter kit X1 2331976
Nozzle Extension X1 EXT150 2323366
Nozzle Extension X1 EXT300 2323356
Nozzle Extension X1 EXT500 2323338
Hose Connector D10-D12 assy 2322761
Hose Connector D8-D10 assy 2322768
Gun Holder 2330599
Gun Holder f. Cabine 2332139
Console 2331558
Wallmount w. Console 2330223
Powder Measuring Adapter X1 assy 2325320
Spare parts
Gun Hook X1 SP 2320330
PT-Pan head screw, self-tapping, Torx 2316896
Outer Nut X1 2320464
Cascade neg. X1 SP 2324136
1x Cup with Cover SP 2324139
5x Cup with Cover SP 2324140
Injector holder Sprint complete 2307117
Electrode Holder X1 R SP 2322490
Electrode Holder X1 R + Spray Nozzle 2322493
Electrode Holder X1 F SP 2322529

Description Item number
Wear parts
Wedge X1 2320488
Flat Spray Nozzle X1 assy 2321976
Deflector Cone D18 asse. 2321981
Deflector Cone D25 asse. 2321980
Deflector Cone D34 asse. 2321171
Deflector cone sleeve X1 2320503
Round Spray Nozzle X1 VL SP 2324148
Flat Spray Nozzle X1 VL SP 2324147
Electrode X1 VL150 SP 2324144
Electrode X1 VL300 SP 2324145
Electrode X1 VL500 SP 2324146
Nozzle Insert X1 EXT F 2323401
Nozzle Insert X1 EXT R 2323461
Contact X1 EXT assy 2323361
Electrode CoronaStar X1 SP 2322835
Others
Tribo Manual Gun PEM-T3 351019
Tribo Cup Gun PEM-TG3 351036