Spare Parts for Powder Coating Gun: Powder coating is a dry finishing process that uses finely ground particles of pigment and resin to create a durable, protective coating. It is a popular choice for finishing a wide variety of products, including automotive parts, appliances, electronics, and furniture.
Powder coating equipment can be complex and expensive. However, it is important to have spare parts on hand in case of a breakdown. This will help to minimize downtime and ensure that your production line continues to run smoothly.
Common Spare Parts for Powder Coating Equipment
Some of the most common spare parts for powder coating equipment include:
- Powder coating gun nozzles: Powder coating gun nozzles are responsible for applying the powder coating material to the part being coated. They are available in a variety of sizes and shapes to suit different applications.
- Powder coating gun electrodes: Powder coating gun electrodes are responsible for charging the powder coating particles so that they will adhere to the part being coated. They are typically made of brass or aluminum.
- Powder coating gun pumps: Powder coating gun pumps are responsible for feeding the powder coating material to the gun. They are typically available in two types: air-driven pumps and electric pumps.
- Powder coating gun filters: Powder coating gun filters are used to remove contaminants from the powder coating material before it is applied to the part being coated. This helps to prevent defects in the finish.
- Powder coating oven control boards: Powder coating oven control boards are responsible for regulating the temperature and curing process of the oven. They typically have a variety of features, such as programmable controllers, temperature sensors, and safety interlocks.
- Powder coating oven heating elements: Powder coating oven heating elements are responsible for heating the oven to the desired temperature. They are typically made of nickel-chromium alloy or stainless steel.
- Powder coating oven fans: Powder coating oven fans are used to circulate the hot air around the oven, ensuring a uniform cure. They are typically available in two types: axial fans and centrifugal fans.
- Powder coating oven exhaust systems: Powder coating oven exhaust systems are used to remove fumes and gases from the oven. This helps to create a safe and healthy work environment.
Additional Spare Parts for Powder Coating Equipment
In addition to the common spare parts listed above, there are a variety of other spare parts that may be needed for powder coating equipment, such as:
- Powder coating hoses: Powder coating hoses are used to transport the powder coating material from the hopper to the gun. They are typically made of a durable material such as polyurethane or Teflon.
- Powder coating hoppers: Powder coating hoppers are used to store the powder coating material. They are typically made of stainless steel or aluminum.
- Powder coating racks: Powder coating racks are used to hold the parts being coated in place. They are typically made of stainless steel or aluminum.
- Powder coating safety equipment: Powder coating safety equipment helps to protect workers from the harmful effects of powder coating dust and fumes. This equipment may include respirators, gloves, and safety glasses.
Choosing the Right Spare Parts
When choosing spare parts for your powder coating equipment, it is important to consider the following factors:
- Compatibility: Make sure that the spare parts you choose are compatible with your specific type and make of powder coating equipment.
- Quality: Choose spare parts that are made from high-quality materials and components. This will help to ensure that the parts are durable and will last for many years.
- Price: Compare prices from different suppliers to find the best deals on spare parts.
Maintaining Your Powder Coating Equipment
In addition to having spare parts on hand, it is also important to regularly maintain your powder coating equipment. This will help to extend the life of your equipment and prevent breakdowns. Some basic maintenance tasks include:
- Cleaning: Clean your powder coating equipment regularly to remove any powder coating dust or fumes. This will help to prevent corrosion and ensure that the equipment operates properly.
- Lubrication: Lubricate any moving parts on your powder coating equipment according to the manufacturer’s instructions. This will help to reduce wear and tear.
- Inspection: Inspect your powder coating equipment regularly for any signs of damage or wear. If you find any damage, repair or replace the parts immediately.
By following these tips, you can ensure that your powder coating equipment is always running at its best. This will help you to produce high-quality powder coated products and minimize downtime.
Spare Parts for Powder Coating Gun
Spare parts for powder coating guns are essential for maintaining the performance and longevity of these critical tools. Depending on the specific type of gun and its usage, different spare parts may be needed more frequently than others. Here’s a list of common spare parts for powder coating guns:
- Nozzles: Nozzles are responsible for shaping the powder stream and controlling the spray pattern. They can wear out over time due to friction and abrasion, affecting coating uniformity and efficiency. Replacing worn-out nozzles is crucial for maintaining consistent spray quality.
- Injectors: Injectors are responsible for drawing powder from the hopper and delivering it to the nozzle. They can become clogged or damaged due to powder contaminants or wear from continuous use. Replacing or cleaning injectors is essential for ensuring proper powder flow and preventing blockages.
- Electrostatic Unit: The electrostatic unit charges the powder particles, attracting them to the grounded workpiece and achieving even coverage. Over time, the electrostatic unit’s efficiency can diminish due to wear and tear. Replacing or reconditioning the electrostatic unit is important for maintaining proper electrostatic charging and preventing inconsistent coating.
- Air Pressure Regulator: The air pressure regulator controls the flow of compressed air to the gun, affecting the powder feed rate and spray pattern. A faulty or malfunctioning regulator can lead to inconsistent powder application and coating defects. Replacing or adjusting the regulator is essential for maintaining proper air pressure and optimizing powder application.
- Trigger Assembly: The trigger assembly is responsible for actuating the gun’s powder release mechanism. Over time, the trigger mechanism can become worn or damaged, affecting the gun’s responsiveness and powder release control. Replacing or repairing the trigger assembly is crucial for maintaining smooth operation and preventing accidental powder release.
- Gaskets and Seals: Gaskets and seals form tight barriers between different components of the gun, preventing powder leaks and air pressure losses. Over time, gaskets and seals can become brittle, cracked, or worn, leading to powder contamination and inefficient operation. Replacing or renewing gaskets and seals is essential for maintaining proper sealing and preventing leaks.
- Filters: Filters are used to remove contaminants from the compressed air supply, preventing damage to the gun’s internal components. Clogged or damaged filters can restrict airflow and affect powder application. Regularly inspecting and replacing filters are essential for maintaining proper air filtration and protecting the gun’s internal components.
- Hoses and Tubing: Hoses and tubing transport powder from the hopper to the gun and deliver compressed air to various components. Over time, hoses and tubing can become cracked, kinked, or worn, leading to powder leaks and air pressure losses. Replacing or repairing damaged hoses and tubing is crucial for maintaining proper powder delivery and air supply.
Gema Optiflex Non-OEM Spare Parts
We manufacture and supply Gema Spare Parts for Gema Optiflex 2 and Pro Gun. Check our link below for the Gema spare parts list and Gema gun spare parts
Gema is a leading manufacturer of powder coating equipment. They offer a wide range of spare parts for their machines, including:
- Nozzles: Round jet nozzles, venturi tubes, and other types of nozzles are used to apply powder coating to parts.
- Deflectors: Deflectors are used to control the flow of powder coating and ensure that it is applied evenly to parts.
- Hoses: Powder coating hoses are used to transport powder coating from the powder feeder to the spray gun.
- O-rings: O-rings are used to seal joints and prevent leaks.
- Other parts: Other spare parts include powder feeder components, pumps, and electrical components.
Here is a list of some of the main Gema spare parts, along with their order numbers:
- Nozzles:
- Round jet nozzle set for Gema Optiselect: #382922
- Hexagon jet nozzle set for Gema Optiselect: #382923
- Trijet nozzle set for Gema Optiselect: #382924
- Deflectors:
- Deflector for Gema Optiselect: #377730
- Deflector for Gema Optiflex 2: #1006532
- Hoses:
- Powder coating hose for Gema Optiselect: #1006486
- Powder coating hose for Gema Optiflex 2: #1006533
- O-rings:
- O-ring for Gema Optiselect pump: #377725
- O-ring for Gema Optiflex 2 pump: #1006487
- Other parts:
- Pump insert for Gema Optiflow injector pump: #1006485 (2PK)
- Hose connector Optiflex 2: #1006531
- Round spray assembly Optiflex 2: #1008150
This is just a small sample of the many Gema spare parts that are available. For a complete list of spare parts, please consult the Gema website or contact a Gema authorized distributor.
It is important to note that these order numbers may change over time, so it is always best to verify the order number with your Gema authorized distributor before placing an order.
If you need to replace a spare part on your Gema powder coating machine, it is important to order the correct part from a reputable supplier. You can find a list of Gema authorized distributors on the Gema website.
Here are some examples of Gema spare parts that you can purchase:
- Round jet nozzle set for Gema Optiselect: #382922
- Venturi tube for Optiflow pump: #377724
- Pump insert for Optiflow injector pump: #1006485 (2PK)
- Hose connector Optiflex 2: #1006531
- Round spray assembly Optiflex 2: #1008150
You can also purchase Gema spare parts kits, which include a variety of common spare parts. This can be a convenient way to have a stock of spare parts on hand so that you can quickly and easily repair your machine if needed.
If you are unsure which spare part you need for your Gema powder coating machine, you can contact us for assistance.
Below, you can find the Non-OEM Gema spare parts list for your reference:
Gema Spare Parts
- Round Jet Nozzle for Gema Optiflex 382922 (382 922)
- Venturi Tube for Optiflow Pump 377724 (377 724)
- Gema Deflector 16 mm 107210 (107 210)
- Gema Deflector 20 mm 331338 (331 338)
- Gema Deflector 24 mm 331333 (331 333)
- Gema Deflector 32 mm 331325 (331 325)
- Gema Check valve black supplementary 261203 (261 203)
- Gema check valve red 0261211 (0261 211)
- Gema Easy Select Electrode Holder Flat 379140 (379 140)
- Gema Easy Select Flat Nozzle 377856 (377 856)
- Gema Easy Select Round Electrode 382914 (382 914)
- Gema Easy Select Flat Jet Nozzle Set 379620 (379 620)
- Gema Opti Select Flat Nozzle 1000049
- Gema Optiflow Hose Connection 387827
- Gema Optiflow Powder Injector Pump 391530 (391 530)
- Gema Optiselect Electrode Holder Flat 1000055
- Gema Powder Hose Conn Opti Pro 121578 (121 578)
- Gema Easy Select Round Jet Nozzle 16 mm 379611 (379 611)
- Gema Opti Select Round Jet Nozzle 378518 (378 518)
- Gema Teflon Sleeve 116735 (116 735)
- Gema Tefzel Sleeve 114630 (114 630)
- Gema Threaded Nut 387819 (387 819)
- Gema Opti Select Flat Nozzle 1000047
- Gema PG-1 Cascade 338249 (338 249)
- Gema Easy Select Manual Cascade 378046 (378 046)
- Cascade Opti Auto 393703 (393 703)
- Gema Opti Manual Cascade 1000809
- Gema PG-2 Cascade 361534 (361 534)
- Gema Round Jet Nozzle Set Opti Select 382922 (382 922)
- Gema Opti Select Sleeve Threaded 1000948
- Gema OptiGun 2A Automatic Clamp Ring Powder Tube 121576
- Gema Wear Tube 377724 (377 724)
- Gema Hose Connector 1001340
- Gema Flat Jet Nozzle Set 319350 (319 350)
- Gema Round Jet Nozzle Set 116142 (116 142)
- Gema Flat Nozzle 318744 (318 744)
- Gema O-Ring 1007794, 231517
- Gema Spectracoat Fluidizing Pads 237264 (237 264)
- Gema O-Ring 266930 (266 930)
- Gema Contact Ring 318760 (318 760)
- Gema Electrode 318779 (318 779)
- Gema PG-2A Barrel Mounting Gasket 360236 (360 236)
- Gema Easy-Select Hose 377988 (377 988)
- Gema Optigun 2A Automatic Gun Body 393681 (393 681)
- Gema PG-1 Metallic Powder Hose Connector 115176 (115 176)
- Gema Pin Male Plug 20085
- Gema Pump Quick Release Coupling for 8 mm Hose 2031
- Gema PG Series Round Jet Electrode Holder 351709
- Gema OptiGun 2A Automatic Powder Tube Complete 385182 (385 182)
- Gema Grounded Powder Hose 12x18mm
- Gema Insert Sleeve Teflon 1006485
- Gema OptiFlex Gun 2 Threaded Sleeve 1007229
- Gema Optiflex 2 Flat Jet Nozzle 1007934, 1010090
- Gema OptiFlex 2 Flat Jet Nozzle NF21 1007935
- Gema OptiFlex 2 Flat Jet Nozzle NF20 1007931
- Gema OptiFlex 2 Round Set Nozzle Set NS04 1008150
- Gema OptiFlex 2 Electrode Holder 1007683
- Gema OptiFlex 2 Round Spray nozzle 1008151
- Gema Conveying Air Check Valve Unit 1005589
- Gema Supplementary Air Check Valve Unit 1005590
- Gema OptiFlow Threaded Sleeve 1006483
- Gema Nozzle for Powder Injector 1006488
- Gema OptiFlow Hose Connection 10-12 mm 1006531
- Gema OptiFlow Powder Injector 1007780
- Gema OptiFlow Nozzle Fixation for Injector 100779
- Gema OptiFlex 2 Flat Jet Nozzle Set 1007932
- Gema OptiFlex 2 Flat Jet Nozzle Set 1008142
- Gema OptiFlex 2 Flat Jet Nozzle Set 1008147
- Gema Spring 114625
- Gema OptiFlex 2 Flat Jet Nozzle Set 1007735
- Gema OptiFlex 2 Flat Jet Nozzle Set 1007742
- Gema OptiSelect Electrode Holder 1007684
- Gema OptiSelect Flat Jet Nozzle Assembly 367478 (367 478)
- Gema OptiSelect Flat Jet Nozzle 1000127
- Gema OptiSelect Flat Jet Nozzle 24mm 366226 (366 226)
- Gema PG Series Round Jet Nozzle 331287 (331 287)
- Gema Radia Air Nozzle 356182 (356 182)
- Gema PG2A Insert Sleeve 1000906
- Gema Insert Teflon Sleeve 377767 (377 767)
- Gema PG2A Threaded Sleeve 377708 (377 708)
- Gema PG2A Hose Connector 377716 (377 716)
- Gema PG1 Powder Hose Connector 333727 (333 727)
- Gema PG2A Threaded Sleeve FSD 24 366285 (366 285)
- Gema PG Standart Threaded Sleeve 328774 (328 774)
- Gema EasySelect Threaded Sleeve 379166 (379 166)
- Gema Powder Injector
- Gema Injector Nozzle 1.8 mm
- Gema O-Ring 205141 (205 141)
- Gema Powder Pump Hose Connector 336424 (336 424)
- Gema Teflon Insert Sleeve 336467 (336 467)
- Gema Teflon Insert Sleeve Type PSS300080
- Gema 150 mm Gun Extension 378852 (378 852)
- Gema 300 mm Gun Extension 378860 (378 860)
- Grounded Powder Hose 11×16 mm
- Grounded Powder Hose 10×15 mm
- Gema Nozzle Complete Set 1004530
- Gema Filter Element D9 1003698
Wagner Non-OEM Spare Parts
Wagner non-OEM spare parts are replacement parts for Wagner powder coating equipment that are manufactured by third-party companies. These parts are typically less expensive than Wagner OEM parts, but they may not be of the same quality.
There are a number of reasons why someone might choose to use Wagner non-OEM spare parts. One reason is cost. Wagner OEM parts can be expensive, especially for older models of equipment. Non-OEM parts are typically much cheaper.
Another reason to use non-OEM parts is availability. Wagner OEM parts can be difficult to find, especially for older models of equipment. Non-OEM parts are typically more widely available.
Finally, some people simply prefer to use non-OEM parts. They may believe that the quality of non-OEM parts is just as good as the quality of OEM parts, or they may simply prefer to support third-party companies.
Pros of using Wagner non-OEM spare parts:
- Less expensive
- More widely available
- May be supported by third-party companies
When to use Wagner non-OEM spare parts
Wagner non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies and to make sure that the parts are compatible with your Wagner equipment.
Here are some tips for choosing Wagner non-OEM spare parts:
- Choose parts from reputable companies. There are a number of companies that manufacture high-quality non-OEM parts for Wagner equipment. Do some research to find companies that have a good reputation.
- Make sure the parts are compatible with your Wagner equipment. Not all non-OEM parts are compatible with all Wagner equipment. Be sure to check the compatibility of the parts before you buy them.
- Read reviews of non-OEM parts. There are a number of websites where you can read reviews of non-OEM parts. This can be a helpful way to learn about the quality and performance of different parts.
Overall, Wagner non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies like EMS and to make sure that the parts are compatible with your Wagner equipment.
Wagner Non-OEM Spare Parts
We manufacture non-OEM Wagner spare parts with high quality and low prices for the Wagner Sprint gun. Check our link below for the Wagner spare parts list and Wagner powder coating gun spare parts.
Wagner offers a wide range of spare parts for their paint sprayers, including:
- Nozzles: Round jet nozzles, fan nozzles, and other types of nozzles are used to apply paint to surfaces.
- Filter assemblies: Filter assemblies remove dirt and debris from the paint before it is sprayed.
- O-rings: O-rings seal joints and prevent leaks.
- Hoses: Paint hoses connect the paint sprayer to the paint container.
- Other parts: Other spare parts include gaskets, seals, and springs.
If you need to replace a spare part on your Wagner paint sprayer, it is important to order the correct part from a reputable supplier. You can find a list of Wagner authorized distributors on the Wagner website.
Here are some examples of Wagner spare parts that you can purchase:
- Round jet nozzle set for Control Pro 150: #580662A
- Fan nozzle set for Control Pro 150: #580663A
- Filter assembly for Control Pro 150: #580405A
- O-ring kit for Control Pro 150: #580406B
- Paint hose for Control Pro 150: #580155A
You can also purchase Wagner spare parts kits, which include a variety of common spare parts. This can be a convenient way to have a stock of spare parts on hand so that you can quickly and easily repair your paint sprayer if needed.
Here is a list of some of the main Wagner spare parts, along with their order numbers:
- Nozzles:
- Round jet nozzle set for Control Pro 150: #580662A
- Fan nozzle set for Control Pro 150: #580663A
- Round jet nozzle set for Flexio 510: #529262
- Fan nozzle set for Flexio 510: #529263
- Filter assemblies:
- Filter assembly for Control Pro 150: #580405A
- Filter assembly for Flexio 510: #417323
- O-rings:
- O-ring kit for Control Pro 150: #580406B
- O-ring kit for Flexio 510: #417324
- Hoses:
- Paint hose for Control Pro 150: #580155A
- Paint hose for Flexio 510: #529261
- Other parts:
- Trigger assembly for Control Pro 150: #580404A
- Trigger assembly for Flexio 510: #417322
This is just a small sample of the many Wagner spare parts that are available. For a complete list of spare parts, please consult the Wagner website or contact a Wagner authorized distributor.
It is important to note that these order numbers may change over time, so it is always best to verify the order number with your Wagner authorized distributor before placing an order.
If you are unsure which spare part you need for your Wagner paint sprayer, you can contact us for assistance.
Below, you can find the Non-OEM Wagner powder coating gun spare parts list for your reference:
Wagner Spare Parts
- Deflector Cone D28 0390208
- Deflector Cone D25 0390209
- Deflector Cone D32 0531227
- Deflector Cone D17 0351225
- Deflector Cone D20 0390207
- Deflector Cone D25 0351226
- Air Nozzle 0351346
- Conductive Sleeve 0241476
- Injector Nozzle 0241430
- Collector Nozzle 0241229
- Venturi Injector Nozzle
- Clearance Collector 0241225
- Deflector Cone Sleeve 0390313
- Outer Nut 0351620
- Outer Nut 0351309
- Injector Nozzle 0241923
- C4 Flat Jet Tip Split F1 390324
- C4 Flat Jet Tip Split F2
- Flat Spray Nozzle Complete for Spray Gun
- Fan Spray Nozzle 0351232
- Coupling Joint 9992200
- Powder Tube 0351665
- Powder Tube C2 Manual Gun 0351317
- C4 Outer Nut
- Powder Tube Back 0351618
- Fan Spray Nozzle 0351901
- Nozzle Insert 0351900
- Fan Spray Nozzle 0390326
- C4 Electrode Holder ET 0390915
- C4 Electrode Holder 0390916
- Powder Tube Inner Diameter 11/12 0351619
- C3 Nozzle Insert Assembly 0351940
- C4 Electrode Holder 0390917
- Powder Tube C4 0390909
- Powder Tube C4 0390911
- Nozzle Split 260928
- Fan Spray Electrode
- Round Spray Electrode
- Nozzle Body Assembly C3 0351201
- Nozzle Body Assembly 0390204
- Wagner Powder Injector 0241621
- C4 Spray Gun Extension 150 mm
- C4 Spray Gun Extension 300 mm
- Wagner Cascade 259900
- Grounded Powder Hose 11×16
- Grounded Powder Hose 12×18
- Grounded Powder Hose 10×15
Wagner Powder Gun Spare Parts
Description Item number
Basic units
Manual Spray Gun PEM-X1 2322587
Manual Spray Set X1 2331090
Manual Unit SPRINT AF 2329483
Manual Unit SPRINT 60L 2329489
Manual Unit SPRINT AF USA 2329487
Manual Unit SPRINT 60L USA 2329491
Dual Manual Set SPRINT 2331417
Conversion Set SPRINT 60L V 2309276
Conversion Set SPRINT 3L V 2309277
Manual CupGun PEM-X1 CG 2322588
CupGun Set PEM-X1 CG 2328172
Controler EPG-Sprint X 2324731
Accessories
Trolley Front Caster Set 2324869
Recipe Sticker 2331223
CoronaStar PEM-X1 assy 2322868
Wedge tool X1 2324205
Wedge tool X1 + 20 wedges 2324124
Spare parts starter kit X1 2331976
Nozzle Extension X1 EXT150 2323366
Nozzle Extension X1 EXT300 2323356
Nozzle Extension X1 EXT500 2323338
Hose Connector D10-D12 assy 2322761
Hose Connector D8-D10 assy 2322768
Gun Holder 2330599
Gun Holder f. Cabine 2332139
Console 2331558
Wallmount w. Console 2330223
Powder Measuring Adapter X1 assy 2325320
Spare parts
Gun Hook X1 SP 2320330
PT-Pan head screw, self-tapping, Torx 2316896
Outer Nut X1 2320464
Cascade neg. X1 SP 2324136
1x Cup with Cover SP 2324139
5x Cup with Cover SP 2324140
Injector holder Sprint complete 2307117
Electrode Holder X1 R SP 2322490
Electrode Holder X1 R + Spray Nozzle 2322493
Electrode Holder X1 F SP 2322529
Description Item number
Wear parts
Wedge X1 2320488
Flat Spray Nozzle X1 assy 2321976
Deflector Cone D18 asse. 2321981
Deflector Cone D25 asse. 2321980
Deflector Cone D34 asse. 2321171
Deflector cone sleeve X1 2320503
Round Spray Nozzle X1 VL SP 2324148
Flat Spray Nozzle X1 VL SP 2324147
Electrode X1 VL150 SP 2324144
Electrode X1 VL300 SP 2324145
Electrode X1 VL500 SP 2324146
Nozzle Insert X1 EXT F 2323401
Nozzle Insert X1 EXT R 2323461
Contact X1 EXT assy 2323361
Electrode CoronaStar X1 SP 2322835
Others
Tribo Manual Gun PEM-T3 351019
Tribo Cup Gun PEM-TG3 351036
Nordson Non-OEM Spare Parts
Nordson non-OEM spare parts are replacement parts for Nordson powder coating equipment that are manufactured by third-party companies. These parts are typically less expensive than Nordson OEM parts, but they may not be of the same quality.
There are a number of reasons why someone might choose to use Nordson non-OEM spare parts. One reason is cost. Nordson OEM parts can be expensive, especially for older models of equipment. Non-OEM parts are typically much cheaper.
Another reason to use non-OEM parts is availability. Nordson OEM parts can be difficult to find, especially for older models of equipment. Non-OEM parts are typically more widely available.
Finally, some people simply prefer to use non-OEM parts. They may believe that the quality of non-OEM parts is just as good as the quality of OEM parts, or they may simply prefer to support third-party companies.
Pros of using Nordson non-OEM spare parts:
- Less expensive
- More widely available
- May be supported by third-party companies
When to use Nordson non-OEM spare parts
Nordson non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies and to make sure that the parts are compatible with your Nordson equipment.
Here are some tips for choosing Nordson non-OEM spare parts:
- Choose parts from reputable companies. There are a number of companies that manufacture high-quality non-OEM parts for Nordson equipment. Do some research to find companies that have a good reputation.
- Make sure the parts are compatible with your Nordson equipment. Not all non-OEM parts are compatible with all Nordson equipment. Be sure to check the compatibility of the parts before you buy them.
- Read reviews of non-OEM parts. There are a number of websites where you can read reviews of non-OEM parts. This can be a helpful way to learn about the quality and performance of different parts.
Overall, Nordson non-OEM spare parts can be a good option for those who are on a budget or who need parts for older models of equipment. However, it is important to choose non-OEM parts from reputable companies like EMS and to make sure that the parts are compatible with your Nordson equipment.
Here are some additional tips for using Nordson non-OEM spare parts:
- Be aware of the potential risks. Using non-OEM parts can potentially void your Nordson warranty and could also lead to equipment failure or safety hazards.
- Inspect the parts carefully before using them. Make sure that the parts are well-made and that they are compatible with your Nordson equipment.
- Be prepared to replace non-OEM parts more often. Non-OEM parts may not be as durable as Nordson OEM parts and may need to be replaced more often.
Nordson Non-OEM Spare Parts
We manufacture non-OEM Nordson spare parts with high quality and low prices for the Nordson Encore gun. Check our link below for the Nordson spare parts list and Nordson powder coating gun spare parts.
Nordson offers a wide range of spare parts for their powder coating and liquid dispensing equipment, including:
- Nozzles: Round jet nozzles, fan nozzles, and other types of nozzles are used to apply powder coating or liquid to surfaces.
- Pumps: Powder coating pumps and liquid dispensing pumps are used to transport powder coating or liquid from a container to the spray gun or dispensing head.
- Filters: Filters remove dirt and debris from powder coating or liquid before it is applied.
- O-rings: O-rings seal joints and prevent leaks.
- Hoses: Powder coating hoses and liquid dispensing hoses connect the spray gun or dispensing head to the powder coating pump or liquid dispensing pump.
- Other parts: Other spare parts include gaskets, seals, and springs.
If you need to replace a spare part on your Nordson powder coating or liquid dispensing equipment, it is important to order the correct part from a reputable supplier. You can find a list of Nordson authorized distributors on the Nordson website.
Here are some examples of Nordson spare parts that you can purchase:
- Round jet nozzle set for Nordson ProBlue 3800 powder coating system: #T10B83B0S
- Fan nozzle set for Nordson ProBlue 3800 powder coating system: #T10B83P8S
- Powder coating pump for Nordson ProBlue 3800 powder coating system: #T9K35K4S
- Filter assembly for Nordson ProBlue 3800 powder coating system: #T10C91A0S
- O-ring kit for Nordson ProBlue 3800 powder coating system: #T10H46E9S
- Powder coating hose for Nordson ProBlue 3800 powder coating system: #T10B83P7S
You can also purchase Nordson spare parts kits, which include a variety of common spare parts. This can be a convenient way to have a stock of spare parts on hand so that you can quickly and easily repair your equipment if needed.
If you are unsure which spare part you need for your Nordson powder coating or liquid dispensing equipment, you can contact us for assistance.
It is important to note that these order numbers may change over time, so it is always best to verify the order number with your Nordson authorized distributor before placing an order.
Here is a list of some of the main Nordson spare parts, along with their order numbers:
Powder Coating
- Round jet nozzle set for Nordson ProBlue 3800 powder coating system: #T10B83B0S
- Fan nozzle set for Nordson ProBlue 3800 powder coating system: #T10B83P8S
- Powder coating pump for Nordson ProBlue 3800 powder coating system: #T9K35K4S
- Filter assembly for Nordson ProBlue 3800 powder coating system: #T10C91A0S
- O-ring kit for Nordson ProBlue 3800 powder coating system: #T10H46E9S
- Powder coating hose for Nordson ProBlue 3800 powder coating system: #T10B83P7S
Liquid Dispensing
- Dispensing needle for Nordson EFD UltimusPlus V10 liquid dispensing system: #7027226
- Dispensing valve for Nordson EFD UltimusPlus V10 liquid dispensing system: #7022766
- Liquid dispensing pump for Nordson EFD UltimusPlus V10 liquid dispensing system: #7018457
- Filter assembly for Nordson EFD UltimusPlus V10 liquid dispensing system: #7023833
- O-ring kit for Nordson EFD UltimusPlus V10 liquid dispensing system: #7024423
- Liquid dispensing hose for Nordson EFD UltimusPlus V10 liquid dispensing system: #7018458
This is just a small sample of the many Nordson spare parts that are available. For a complete list of spare parts, please consult the Nordson website or contact a Nordson authorized distributor.
It is important to note that these order numbers may change over time, so it is always best to verify the order number with your Nordson authorized distributor before placing an order.
Below, you can find the Non-OEM Nordson spare parts list for your reference:
- 8 mm Black Air Line Hose Tube
- 8 mm Blue Air Line Hose Tube
- 8 mm Red Air Line Hose Tube
- Nordson Hose Connector 114219
- Nordson Glass Filled Teflon 174215
- Nordson Venturi Nozzle 249503
- Nordson Nozzle Flat 141045
- Nordson Adapter for Hose 134386
- Nordson Hose Connector 139943
- Nordson Flat Spray Nozzle Kit 140144
- Nordson Nozzle 173139
- Nordson Wear Sleeve 134385
- Nordson Wear Tube Standart Flow 249507
- Nordson Resistor Kit 134376
- Nordson Deflector 19 mm 173138
- Nordson Deflector 16 mm 147880
- Nordson Deflector 14 mm 135865
- Nordson O-Ring 942101
- Nordson O-Ring 940184
- Nordson O-Ring 940163
- Nordson O-Ring 940129
- Nordson Venturi 244642
- Nordson Grounded Powder Hose 12×18 mm
- Nordson Deflector Cone 26mm 173141
- Nordson Deflector Cone 19mm 133714
- Nordson Versa Spray Nozzle 145558
- Nordson Encore Venturi 1095899
- Nordson Pump Adapter 152227
- Nordson Powder Pump Complete 249500
- Nordson Powder Pump Venturi Nozzle 631420
- Nordson O-Ring 940147
- Nordson O-Ring 1095885
- Nordson Encore Pump Throat Holder 1095898
- Nordson Teflon Venturi Nozzle 109101
- Nordson Pump Adapter 309471
- Nordson Encore Teflon Pump Throat 1095910
- Nordson Manual Gun 2.5 mm Flat Nozzle 302101
- Nordson Manual Gun 3 mm Flat Nozzle 302102
- Nordson Manual Gun 4 mm Flat Nozzle 302103
- Nordson Manual Gun War Sleeve 288572
- Nordson Manual Gun Electrode Holder 288554
- Nordson Manual Gun Electrode 288560
- Nordson Manual Gun Support Electrode 288557
- Nordson Sure Coat Automatic Electrode Holder 1010561
- Nordson Sure Coat Automatic 4mm Flat Spray Nozzle 1010661
- Nordson Sure Coat Automatic 2.5 mm Flat Nozzle 1010662
- Nordson Cascade Multiplier Kit 1014038
- Nordson Service Kit Nozzle 32 mm 145559
- Nordson Lance Extension Lance Extension 150 mm 233469
- Nordson Lance Extension Lance Extension 300 mm 233468
- Nordson Lance Extension Lance Extension 450 mm 233455
- Nordson Flat Nozzle 4 mm 141044
- Nordson Flat Nozzle Teflon 4 mm
- Nordson Veraspray Extension Nozzle 183334
- Nordson Veraspray Adapter Nozzle Kit 182254
- Nordson Veraspray Sleeve 173179
- Nordson Veraspray Spider 182255
- Nordson O-Ring 940117
- Nordson Veraspray Electrode Assembly 150 mm 160066
- Nordson Veraspray Electrode Assembly 300 mm 160068
- Nordson Veraspray Venturi Tivar 1085643
- Nordson Veraspray Teflon Venturi 1085647
- Nordson Veraspray Inline Venturi Tivar 1083135
- Nordson O-Ring 1306432
- Nordson Venturi Sleeve 1080068
- Nordson Powder Pump Replacement Nut 1095914
- Nordson Powder Pump Body 1095913
- Nordson Powder Pump Replacement Nut 1082203
- Nordson O-Ring 940015
- Nordson Throat Tivar 1082201
- Nordson Teflon Throat 1084777
- Nordson Pump Body 1085678
- Nordson O-Ring 941145
- Nordson O-Ring 940084
- Nordson Wear Sleeve 118832
- Nordson Throat Holder 307435
- Nordson Tivar Throat with O-Ring 307437
- Nordson Throat with Holder 307439
- Nordson Air Nozzle 244643
- Nordson O-Ring 940142
- Nordson Tivar Throat 226713
- Nordson Teflon Throat 225549
- Nordson Tivar Throat
- Nordson Wear Tube 224736
- Nordson Tivar Venturi Throat 631408
- Nordson Venturi Throat Teflon 635001
- Nordson Lance Extension 150 mm
- Nordson Replacement Nozzle 1081638
- Nordson Electrode Assemble 1083137 / 1106076
- Nordson Nozzle 6 mm 1081659
- Nordson Nozzle 3 mm 1081657
- Nordson Nozzle 2.5 mm 1081656
- Nordson Nozzle 60 Degree 1082184
- Nordson Nozzle 1082186
- Nordson Powder Tube Elbow 1081532
- Nordson Powder Outlet Tube 1085024
- Nordson Powder Inlet Tube 1085026
- Nordson Conical Deflector Nozzle 16 mm 1083201
- Nordson Conical Deflector Nozzle 19 mm 1083205
- Nordson Conical Deflector Nozzle 26 mm 1083206
- Nordson Hose Adapter 1085025
- Nordson Nozzle 635007
- Nordson Inlet Teflon Distributor 631234
- Nordson Teflon Inlet Wear Sleeve 631232
- Nordson Teflon Outlet Distributor 631236
- Nordson Spacing Ring 631220
- Nordson Positioning Ring 631210
- Nordson Teflon Charge Service Kit 631207
- Nordson Grounded Powder Hose
- Nordson Low Flo Suction Tube 610 mm 152223
- Nordson Powder Pump Body 165635
- Nordson Low Flo Powder pump 165636
- Nordson Replacement Low Flow Venturi Teflon 174213
- Nordson Replacement Powder Pump Housing 249502
- Nordson Charge Moldule Service Kit Body 631208
- Nordson Tribomatic 631211
- Nordson Tribomatic Outer Wear Sleeve Teflon 631212
- Nordson Replacement Conductive O-Ring 940207
- Nordson Replacement Silicon O-Ring 940284
- Nordson Conductive O-Ring 942106
- Nordson Encore Replacement Flat Spray Nozzle 1081658
- Nordson Replacement O-Ring 1088590
- Nordson Encore Pump Adapter 1095916
- Nordson Encore Powder Pump Injector 1095917
- Nordson Encore Powder Pump Connector 1096081
- Nordson Encore Adapter Assembly 1601756
- Nordson Encore Replacement Conical Nozzle 1082060
- Nordson Powder Pump Nozzle 3 mm w/O-Ring 139902